Greenhouses are in a high temperature and high humidity environment all year round, and the corrosion resistance of each component has a direct impact on the service life of the greenhouse. Therefore, it is necessary to regularly maintain the greenhouse.
Repair and cleaning of shed filmRepair method:
For the torn part, use transparent tape or special film glue to repair. If the damage is large, you can cover the damaged area with a new layer of film to ensure that the coverage area is sufficient. Cleaning the film: Clean it regularly, and choose sunny days with high temperatures. Use a soft brush to clean section by section to ensure that the surface of the film is clean. If there is a ladder, you can use the ladder to clean it at a high place.
Repair and maintenance of sunshade netsCheck the power system: Check the power system regularly, especially the gears and other parts to ensure their normal operation. Add lubricating oil to ensure the smooth operation of each component. Support and pressure curtain lines: Check the support and pressure curtain lines regularly, and replace the fallen and broken parts in time. Adjust the push curtain rod and drive shaft to ensure that they run in parallel and straight lines.
Maintenance of metal framesCheck the bolts regularly: For the frames connected by bolts, check the tightness of the bolts regularly. If looseness is found, tighten the bolts in time to prevent loosening problems caused by frequent use. Welding frames: Check the welding points regularly to prevent cracking. If cracking is found, perform welding repairs in time. For metal components that are not galvanized, apply anti-rust paint regularly to extend the service life. Shed film protection Use cloth to wrap the raised steel frame to prevent friction from damaging the shed film.
Maintenance and anti-corrosion process treatment of bamboo and wood frames: Perform anti-corrosion process treatment on bamboo and wood frames before use to increase their resistance to humidity and high temperature. Regular inspection and reinforcement: Regularly inspect the bamboo and wood frames, and any rotten or damaged parts must be reinforced or replaced in time. Fire sources are prohibited from approaching to prevent fire.
Maintenance of irrigation and fertilization systems Check the water supply pipeline: Regularly check whether the water supply pipeline has leaks, water bubbling, dripping, leaking, etc. Check the integrity of the valve to ensure that it is opened and closed normally. Drip and sprinkler nozzles: Regularly check drip and sprinkler nozzles to prevent falling off and clogging. Water treatment system maintenance: Clean the water treatment membrane every month to ensure good water quality in the system. Deal with blockages in a timely manner to ensure the normal operation of the fertilizer applicator.
These detailed steps will help ensure that each aspect is fully maintained, thereby extending the service life of the greenhouse and keeping it running efficiently.
